Step drill bit sizes explained: what do those steps mean?

But there are multiple step drill bits size, but you know what steps mean?, we’re about to tell you just that. So let’s take a deeper look into the world of step drill bit and a hole saw sizes and what all those numbers actually mean.

A Guide to Sizes and Steps

Step Drill Bits include more than one step or layer of bit. Each step represents an incremental size the bit can drill. The increments are small so the bit ascends gently on the bit still allowing you to drill different size holes without having to swap out for another one.

Making Sense of the Steps

Just see a step twist drill bit, and you will notice that it is made up of several steps, different sizes angled at the two ends you cut on each other. This is the diameter of hole you would be able to drill with each step. For example, for a 1/8 inch step, you will drill a 1/8inch hole.

Decoding the Different Sizes

Step Drill Bits are usually sold in sets each set may include two or more Step. The step on the Twist Drill is actually one distance in sizes, then the various steps are actually etched into it so you can look and see from a simple list what size hole each step would be for. The further up the steps around that bit you go, the bigger hole it’s going to make.

What Each Step Size Indicates

A step drill bit, including the one from it down each increase, does not exceed the largest hole diameter the aperture. So for example, if there’s one marked step. 3/8 inch, the biggest hole it can drill is 3/8”. When choosing from the various bead sizes each step is on the bit itself.

A Comprehensive Explanation

Well, in the grouping of Step drill bit sizes are used to determine its size hole or get drilled. Knowing the steps and sizes of a step drill bit will help you to choose the correct bit for your drilling job. Whether you are on the job site working in construction or any high concentration work sites, even performing home use or home improvement project-alike, selecting the right step drill size is the requirement for precision.

Step Step Drill sizes in heat treated might appear to be a little daunting at first, but once you break it down, they are easy to order. Remember, each step on the bit is actually a different size hole which is great because this gives you the ability to add a precise sized hole and not just in 1/8th inch increments. So when reach for that step drill bit set again, you have a little more useful context on what the steps included actually mean and how they’ll perform for you.